Laser Long Pulse Nd:yag 1064 nm

Laser Long Pulse Nd:yag 1064 nm

Cosjet SR
Duetto
Davinci Lipo

COSJET SR

As a Long Pulsed Nd:YAG Laser, this is a general cosmetic laser equipment that materializes two wavelengths of 1064nm and 1320nm and, by using a hand-piece that allows for easy alterations of beam size, can be used in hair removal operations, treatment of facial blushes and varices, and removal of fine wrinkles.

WON-COSJET SR hand-piece
As a cooling method that relieves the trouble of assistant or pulse cooling, this is an upgraded contact cooling system that allow simultaneous cooling and laser irradiation through the sapphire window chilled by the peltier cooling element within the hand-piece

Main Applications : Hair removal, Vascular, Veins, Skin Rejunevation

Skin Rejuvenation - 1320nm
This Medical Laser Equipment, The WON-COSJET SR Laser, uses high water absorption of 1320nm for non-invasive rejuvenation and shows remarkable results in dermal remodeling by stimulating the fibroblast of the papilla dermis layer and raising collagens, etc.
Cooling air is used to minimize thermal damage of the epidermal lesion and makes possible the largest thermal effect on dermal lesions, allowing safe and easy use.
- Acne Scar
- Acne
- Wrinkles
- Pore Size
- Tightness, Mildness

Hair Removal - 1064nm
The skin penetration of 1064nm wavelength lasers are deeper compared to other wavelengths and, since the effect on melanin is small, can show good results on fine and deeper hair.

Vascular Lesion - 1064nm
Since the deeply penetrating 1064nm wavelength laser is effectively applied to vascular oxy-hemoglobin, it can also be effective on veins deeply located
- Deeper Veins
- Spider Leg Vein

The new Technology of Laser ND : YAG 1064 & 1320 nm

Vascular territories are further improved with the application of the 0.7mm hand-piece.
This makes treatment of veins under 1mm possible
(patients can resume daily activities straight after surgery)
A variety of Beam Spot size.
2, 3, 4, 5, 6, 8, 10mm (7 steps)
Easier-to-use functions.
Addition of spot size automatic recognition function
User-controlled pulse duration (automatic memory can be set up even with the power off)

Technical Specification :

- Irradiation Type	Flashlamp-excited Long Pulsed Nd:YAG Laser
- Electrical Requirement	AC 220 V (10A, 50/60Hz)
- Power Consumption	2.4 kW (Maximum)
- Dimensions	220490750mm (WDH)
- Weight	40Kg
- Pulse Energy	1064nm - up to 50J 1320nm - up to 15J
- Spot Size	2,3,4,5,6,8,10mm (in one handpiece)
- Pulse Width	1~100ms, 300µs
- Energy Fluency	Spot 2mm 3mm 4mm 5mm 6mm 8mm 10mm	1064nm 1592 707 398 255 177 99 64	1320nm 478 212 119 76 53 30 19	300§Á 159 71 40 25 18 9.9 6.4
- Repetition Rate	up to 10Hz
- Beam Delivery	Flexible optic cable and handpiece
- External Air Cooling	Contact Cooling System (Sapphire Window)
- Pilot Laser	Diode Laser, 5mW, 635nm
- Display	128*240 Graphic LCD
- Menu Mode Touch-pads	Keypad for treatment parameter selection & Modification from Menu
- Parameter Memory	Max. 30 parameters memorable(EEPROM)
- Radiation Control	Foot Switch
- Class of Laser	Class 4
- Device Cooling	Air & Water-cooling system
- Power Supply	Half-bridge Parallel-loaded Resonant Converter

Kembali ke atas

DUETTO

Duetto M.T. platform combines two laser wavelenghts (755 and 1064 nm) in one emission with programmable fluence, pulse duration and adjustable sequencies to increase the treatment’s safety and efficiency. Duetto M.T. workstation performs the largest range of hair removal applications, as well as vascular and photorejuvenation treatments.

Variable spot size handpiece (optional)	Features	Options
	Thanks to the wavelenght and pulse Mixed Technology, Duetto M.T. allows the operator to select either one of the two wavalenghts or to work with both of them, using a well defined sequence of pulses that can be adjusted within a wide range, according to the type of patient to be treated. Duetto M.T. is the total solution for the professionals of the aesthetic medicine market, enabling tailored treatments with no compromise between safety and effectiveness	Twain 1320 Optional for this series is the 1320 nm wavelength. Thanks to its higher absorption by water and great penetration into the dermis, it is very effective for collagen remodeling through the fibroblasts stimulation. It consequently enhances the applications of the system on: • Fine wrinkles • Enlarged pores • Acne scars • Keloids • Smoothness and skin lifting • Skin rejuvenation Twain 2940 Optional for this series is a Erbium Yag laser all built into an handpiece. Through this module both fractional and traditional ablative skin resurfacing procedures are possible. This option represents the ideal solution for fast skin texture improvement. Twain IPL Duetto M.T. can be equipped, at any time, with an optional IPL handpiece, enhancing flexibility and versatility. It allows the following treatments: • Hair removal • Pigmented lesions • Skin Rejuvenation • Vascular treatments • Active acne
	Handpieces
Duetto	A full set of handpieces is available on request, with spot sizes up to 18 mm. A variable spot size (2÷5 mm) handpiece is also available as an option. All hand pieces are equipped with the automatic recognition of the spot size to increase the safety of the operations. Twain universal connector Duetto M.T. has a special connector for twain IPL and twain 2940 optional handpieces.

SPECIFICATION

Laser	Nd:YAG
Wavelength (nm)	1064 long	1064 short
Pulse width (ns)	up to 300	up to 0,8
Repetition rate (Hz)	up to 1,5	up to 7
Spot size (mm)	up to 12	up to 10
Fluence range (J/cm2)	up to 400 ; @ 4 mm	up to 40 ; @ 10 mm
Electrical requirements	220 - 230 V AC; 16 A; 50-60 Hz
Dimensions and weight	900(W) x 480 (L) x 930 (H) mm3; 85-90 Kg

Options:
• 1320 nm wavelenghts output;
• air cooling;
• variable spot size handpiece.

Kembali ke atas

DAVINCI LIPO

Da Vinci Lipo is a powerful Nd:YAG 1064 nm laser system for Lipolysis and Laser Assisted Liposuction, offering new real advantages to all novel body shaping procedures. The laser delivers a very high optical peak power.

Peak power is always the key point for selecting a device to create some lipolitic effect with light. Many lasers use a pure thermal effect on body tissues which could instead increase the risk of collateral damages such as burnings and unwanted tissue necrosis.

On the contrary, Da Vinci Lipo uses its ability to produce efficiently a huge photomechanical effect to brake the adiposities without excessive thermal release. A controlled thermal effect is used for enhanced haemostasis and tightening.

New breakthrough V shape cannulas have been developed to perform fat evacuation at the same time of laser emission, in order to dramatically reduce treatment times.

The above technological advantages are very important to perform a safer and more efficient reduction of unwanted fatty volumes in all body’s areas.

TECHNICAL SHEET

Laser Type	Pulsed Nd:Yag
Wavelength	1064 nm
Max Output Power	20 W
Emission	Pulsed
Frequency	2 - 50 Hz
Fibre Optics	400 nm for 1,8 mm ø cannula 600 nm for 2,5 mm ø cannula
Microprocessor controlled
Cooling	Air
Power Supply	230VAC 10 Amax 50/60Hz
Aiming Beam	Red Adjustable
Dimensions	L 840mm W 260mm H 9200mm
Weight	35 kg

Kembali ke atas

Article "Why Laser Surgery for treating prostate enlargment" NEW

Events in 2010

Laser Long Pulse Nd:yag 1064 nm